Build an IoT Smart Garden with ESP32 and Blynk

Create IoT Smart Garden with ESP32 and Blynk

A Different IoT Power and Performance, Use ESP32 microcontroller to MAKE IoT Smart Garden and unleash your creativity

Created by : Rated :4.8 841 views

Last Updated: 2024-11-26 07:11:28 English Course Type: Self Learning

Learn Why you should Interface Arduino and ESP32 in your Electronic Projects
Learn How to connect Arduino Boards with ESP32 and make it Web enabled
Learn how to interface Arduino with ESP32 with one wire only

A Different IoT Power and Performance, Use ESP32 microcontroller to MAKE IoT Smart Garden and unleash your creativity

Gardening is a very enjoyable hobby. But, because most people's busy lifestyles, plants in our gardens might not always get the attention they deserve. But today this will end. What if you can remotely monitor your garden and give your plants the care they need?

There is a way! In this course, we are going to create an IoT-based smart gardening system using the Blynk App.

It's really hard to control ESP Board via mobile, creating a mobile application that can connect to an online server to send and receive commands to ESP Board is a daunting task that requires mobile app development experience and takes a lot of time, effort and in some cases money.

But what if you can create a mobile interface using drag and drop feature with zero programming experience to control and monitor any of the ESP Board pins!

Why you should take this course?

You will learn how to create a wireless IoT smart garden with ESP32 and Blynk

ESP32 is a low cost, low power microcontroller that can be used as the basis for any IoT project

The course is the perfect introduction to the ESP32 and Blynk and it will inspire you to build your own IoT projects

In this course, you will learn how to create an interactive mobile app interface in less than 5 minutes and connect it to your ESP Board via a free web server that will allow you to directly control your board and get a live reading from sensors and buttons plus sending control data to Led, actuator, pump, and motors.

We will use the knowledge you will gain from this course to create an IoT Smart Garden that has Temperature, Humidity, water level, and Soil Moisture sensors and display sensors reading live on your mobile app and use a button inside the app to control a pump to water your garden from anywhere in the world!

In this course, you will create a plant environment monitoring system that monitors soil moisture level, air temperature, humidity, and water level. Then, depending on the conditions, the system allows users to deliver what is needed remotely through a mobile app.

Basic experience in Electronics
A Will to apply, not just watch
Be familiar with the Arduino Uno
Be familiar with the breadboard and wiring.

Electronics Geeks
Arduino Geeks
Anyone interested in making amazing electronics Projects
Anyone interested in making amazing Microcontroller Projects
Anyone interested in creating a web enabled electronic Project using Arduino
Anyone interested in sending data from Arduino to the Web
Anyone interested in connecting his project to the internet with a low budget solution

Section 1 : Introduction & Getting Started 2 Lectures 00:08:06
Lecture 1 :
Introduction Preview
Lecture 2 :
Who We Are
Section 2 : Hardware and Software Requirements 1 Lectures 00:01:19
Lecture 1 :
Hardware and Software Requirements
Section 3 : Working Principle 1 Lectures 00:04:22
Lecture 1 :
Working Principle
Section 4 : ESP 32 3 Lectures 00:22:48
Lecture 1 :
ESP 32 Pinout v1 DOIT
Lecture 2 :
Download and Install Arduino Pro IDE
Lecture 3 :
ESP8266 Download and Install Arduino ESP and USB Driver
Section 5 : Circuit Connection 2 Lectures 00:21:15
Lecture 1 :
Download and Install Circuit Design and Wiring Software
Lecture 2 :
Circuit Connection
Section 6 : ESP32 Coding 3 Lectures 00:28:56
Lecture 1 :
Coding ESP32 Part1
Lecture 2 :
Coding ESP32 Part2
Lecture 3 :
Coding ESP32 Part3
Section 7 : Blynk App 1 Lectures 00:12:28
Lecture 1 :
Blynk App Download and Setup
Section 8 : Final Testing 1 Lectures 00:02:22
Lecture 1 :
Auth Code and WiFi Settings
Section 9 : IoT Crash Course using ESP32 8 Lectures 00:55:48
Lecture 1 :
Hardware and Software Requirements
Lecture 2 :
What is ESP32 Board
Lecture 3 :
Load Your First Code to ESP32 Board
Lecture 4 :
Coding LED Blink
Lecture 5 :
Touch Sensor
Lecture 6 :
Dealing with Analog Signals
Lecture 7 :
PWM Signals
Lecture 8 :
Servo Motor Control using PWM Signal in ESP32

How do i access the course after purchase?
It's simple. When you sign up, you'll immediately have unlimited viewing of thousands of expert courses, paths to guide your learning, tools to measure your skills and hands-on resources like exercise files. There’s no limit on what you can learn and you can cancel at any time.
Are these video based online self-learning courses?
Yes. All of the courses comes with online video based lectures created by certified instructors. Instructors have crafted these courses with a blend of high quality interactive videos, lectures, quizzes & real world projects to give you an indepth knowledge about the topic.
Can i play & pause the course as per my convenience?
Yes absolutely & thats one of the advantage of self-paced courses. You can anytime pause or resume the course & come back & forth from one lecture to another lecture, play the videos mulitple times & so on.
How do i contact the instructor for any doubts or questions?
Most of these courses have general questions & answers already covered within the course lectures. However, if you need any further help from the instructor, you can use the inbuilt Chat with Instructor option to send a message to an instructor & they will reply you within 24 hours. You can ask as many questions as you want.
Do i need a pc to access the course or can i do it on mobile & tablet as well?
Brilliant question? Isn't it? You can access the courses on any device like PC, Mobile, Tablet & even on a smart tv. For mobile & a tablet you can download the Learnfly android or an iOS app. If mobile app is not available in your country, you can access the course directly by visting our website, its fully mobile friendly.
Do i get any certificate for the courses?
Yes. Once you complete any course on our platform along with provided assessments by the instructor, you will be eligble to get certificate of course completion.
For how long can i access my course on the platform?
You require an active subscription to access courses on our platform. If your subscription is active, you can access any course on our platform with no restrictions.
Is there any free trial?
Currently, we do not offer any free trial.
Can i cancel anytime?
Yes, you can cancel your subscription at any time. Your subscription will auto-renew until you cancel, but why would you want to?

Ashraf Al Madhoun,

10429 Course Views

124 Courses

My passion is inspiring people through online courses. I love learning new skills, and since 2007 have been teaching people like you everything I know. Through my online learning business, Educational Engineering School, I create courses that teach you how to become the better version of yourself with all kinds of skills. What would you like to learn? Would you like to make money being an Embedded System Developer? Would you like to build your own 6-figure business? Would you like to learn how to code, circuit design or solder electronic components? Would you like to make better projects? Would you like to start an embedded system career, create great projects, kick start an idea, program, simulate, and create PCB Boards, launch a freelance career? If you want to do any of these things, just enroll in the course. You have a 30-day money back guarantee if you don't like it. And I'm always improving my courses so that they stay up to date and the best that they can be. Check them out, and enroll today!