Circuit Design, Simulation & PCB Fabrication Bundle

Circuit Design, Simulation and PCB Fabrication Bundle

Everything there is to know about how to Design, Simulate Electronic Circuits, Microcontrollers, Arduino and Make a PCB

Created by : Rated :4.4 912 views

Last Updated: 2024-03-08 06:03:49 English Course Type: Self Learning

Make PCB with Zero Experience in Electronics
Learn basic to advance PCB design
Draw a schematic of your circuit in few simple steps
Create your own custom Printed Circuit Board (PCB).
Connect a Breadboard of your circuit in few simple steps
Auto Route to speed up the routing process
Make A PCB in the shortest possible time
Route Printed Circuit Board (PCB)
Prototype your kickstarter idea
Get a job in PCB design
Master Designing electronic circuits
Simulate and test your circuit before actually making it
Make a professional Printed Circuit electronic board PCB for your circuit.
Track you errors in seconds
Use Proteus Software which is one of the best electronic software ever
Simulate and design 3D Electronic Circuits
Program 3D PIC microcontroller using Flow-charting
Simulate 3D PCB
Simulate 3D mechanisms
Simulate 3D Measurements
Choose the right soldering Iron
Choose the right tools you need to have to keep yourself safe while soldering and solder the right way
Choose the best solder out there, and why it is the best
Clean your soldering Iron
Change the soldering Iron tip head
Extend soldering Iron life span
Get your own Soldering tools that are right for you
Solder Correctly following The right steps to an excellent soldering
Set the right heat, solder and tools to be a soldering professional
Differentiate between good soldering and bad soldering with real life examples
Test your codes and schematics for PIC Microcontroller without the risk of burning your board. No More bad connections or wrong codes.
Do realtime Simulation of PIC Microcontroller using development boards with integrated debugger or using any code that you have in hand.
Save money, since this software is for FREE, you won’t have to pay anything, you don’t even have to buy any components before testing your code, write the code, upload it to the software, test it then you are good to go.
and many more

This Bundle Consists morethan 100 Lecture with more than 12.5 hours of HD Video Content and supplementary material in which we cover more than four different software used to design, simulate and fabricate circuits, I can assure you that after this course you will be a professional in Circuit design and fabrication.

Why you should take this course?

The course includes everything you need to know about the electronics design process

Learn how to Design, Simulate Electronic Circuits, Microcontrollers, Arduino and Make a PCB

Learn the science of electric circuits

Programming knowledge

You will learn about Fritzing Software and Proteus Software

Get access to all instructional videos

You will get the chance to learn:

PCB Design and Fabrication using Fritzing Software

PCB Design: Master Designing Printed Circuit Board using Proteus Software

PCB Design: Make Arduino Nano using Altium Designer

3D Simulation: Microcontrollers, Electronics, Mechanism, PCB using Yenka Software

Soldering Electronic Components Like A Professional

Microcontroller Circuit Design and Simulation

Arduino Circuit Design and Simulation

Let's talk in more details about each Section

PCB Design and Fabrication For Everyone

Learn Printed Circuit Board (PCB) design from Scratch With Zero Experience in Electronics, No Effort and a Free Software

>>> This course is a first of its kind in which you will learn from start to finish on how to design your own Printed Circuit Board (PCB) with Zero Experience in Electronics and Circuit Design, YES, you did hear me, No experience is required at all. <<<

Welcome to this course.

This course will help you to gain PCB design skills which will help you to get started freelancing or to get a job in PCB design with a Free Software being one of the top PCB design tools used around the world, so you won't have to pay anything for the software and it has tons of library for almost every component in electronics industry.

Printed Circuit Board design is very interesting for any electronics geek, microcontroller programmers anyone wishing to build his own PCB by themselves. It is very simple and easy to understand for beginners.

No Previous Experience + Free Software + Time Saving Techniques = Perfect PCB Design

This is available for your in this course + Bonuses and additional Material + PCB Design Software.

----------------------

PCB Design: Master Designing Printed Circuit Board

A-Z Guide to designing, testing and Manufacturing any electronic circuit, using the most popular electronic software.

>>> A-Z Guide to designing, drawing and testing any electronic circuit that comes in hand, using one of the most popular software in the electronics industry, after this course you will be a master at making your own electric circuit board. <<<

Welcome to this course.

You will become professional in making your own electronics circuits, you will even be able to master mass producing any electronics circuit that you find useful.

Video and Text lectures are included along with the software package that will be used in this course.

The course begins with introducing electronic circuit design then lessons for beginners to allow you become an expert, then at the end we will make a more advanced circuit and prepare it for mass production like professional.

All what you need for this course is your laptop and headphones.

This course is open for comments and suggestions.

Why you should take this course, well, because you will learn by doing not by listening and you will become an expert in making your own circuits.

--------------------------

3D Simulation: Microcontrollers, Electronics, Mechanism, PCB

Enter the world of 3D simulation and have fun learning and teaching Microcontroller Electronics, Mechanical and PCB

>>> 3D simulators nowadays are covering all aspects of the electronic design process, in 3D. In this course you will get the chance to explore the wonders of 3D simulation of a limitless range of circuit boards, a 2D circuit design tools, and also PIC microcontroller simulation, testing and programming. <<<

Welcome to this course.

You will get the chance to learn:

3D Electronic simulation and design

PIC microcontroller programming

Flowcharting

3D PCB simulation

3D mechanisms

Measurement

What You Will learn in This Course

What is Crocodile Technology

Why it is helpful to simulate and design in 3D

Download and Install the Software

User Interface Introduction

Design and Simulate ON/OFF Switches Circuits

Design and Simulate Microcontroller Systems

Flowcharting.

Design and Simulate Simple Led On/Off Circuits

Design and Simulate Simple Led Flasher Circuits

Design and Simulate Simple 7 Segment Circuits

Design and Simulate Counter using 7 Segment Circuits

Design and Simulate Motors

This will be a journey of a life time for everyone looking for a new vision in Engineering Simulation, easy to use and really helpful software will be introduced.

------------------------------------------

How to Solder Electronic Components Like A Professional

In this Course you will learn how to Master Soldering in no Time

>>> In this Course you will learn how to Master Soldering in no Time <<<

Welcome to this course.

1.5 Hour of HD Content | 1 Hour of Practical Videos | 1500 Students

STOP Wasting Time, Money and Effort on Bad Soldered boards, Start Solder correctly to have a long lasting Fully functional Board.

Ever Wondered Which Soldering Iron is right for you?

Did you ask Yourself why My soldering doesn't look or feel like a professionally soldered board like you see in most online videos and images or even in boards that you purchase?

This Course Have all the answers for you

You will learn how to master soldering, and use the right tools for the job

You can count on these results:

Learn how to choose the right soldering Iron

Learn how to change the soldering Iron tip head

Learn what is the best solder out there, and why it is the best

Learn how to clean your soldering Iron

Learn how to extend soldering Iron life span

Learn what are the right tools you need to have to keep yourself safe while soldering and solder the right way

Learn the difference between good soldering and bad soldering with real life examples

Basic soldering is a skill that's easy to learn and not hard to master.

It just takes practice!

There is a huge range of soldered situations out there, from tiny chip resistors on circuit boards to large UHF connectors.

There is also a large variety of irons, tips and solder to choose from, and it certainly does help to have the right tool for the job.

Good luck, and remember....

Good soldering takes practice!

Warning :You are working with HOT liquid metal, it is a matter of time before you will get burned.

Be careful!

Contents that will be introduced in this Course

•Soldering Tools

•Soldering Accessories

•Step 1: Preparation

•Step 2: Tinning

•Step 3: Soldering

•Cleaning

•Tips and Tricks

----------------------------------------------

PIC Microcontroller Simulation: Unleash the power of Code

Stop Wasting Time Start working with different PIC Microcontroller and start unleashing the power of code in Simulation

Start your PIC Microcontroller Simulation Journey by working with different PICMicrocontroller without buying them. Unleash the power of code in Simulation

>> PIC Microcontroller is an easy-to-use Microcontroller. Sensing the environment by receiving inputs from many sensors. PIC Microcontroller affects its surroundings by controlling lights, motors, and a number of other accessories. It's intended for anyone making interactive hardware projects and in this course, we will make it easy for you to Code and Simulate PIC Microcontroller and Start Testing Your Codes Freely. <<<

Welcome to PIC Microcontroller Simulation Course.

In this course, you will learn how to real-time Simulation of PIC Microcontroller using different Boards and Schematics in A Professional Simulation Environment. It will help you unleash your full coding potential without buying any of the Training boards, you just need to write your code and upload the hex file to the Simulation Software.

This course will help you test your codes and schematics for PIC Microcontroller without the risk of burning your board. No More bad connections or wrong codes.

Be sure that you will learn a lot from this course and it will help you advance your Microcontroller Career. As a result, you will save Money and Time when simulating Microcontrollers

Contents and Overview This course is designed for anyone interested in learning PIC Microcontroller and Simulate different type of it with different components without buying any of them and for FREE. You don't need to have any previous experience, and all you need is a computer. The Simulation Software is FREE

Why You Should Take This Course?

Save Circuit design and Simulation Time, since you will be able to simulate using a real-life board that is designed to meet all your needs

You don't need to hock or connect any wire, write the code and uploads it to the free simulation software.

Save money, since this software is for FREE, you won’t have to pay anything, you don’t even have to buy any components before testing your code, write the code, upload it to the software, test it then you are good to go.

Real-time debugging and tracking of signals and data memory.

Proteus Simulation software cost around 450$ and another cost up to 1000$. The software that I will teach you how to use it for free.

You won’t have to pay anything, download and install then you are good to go. Start using it in no time.

PIC Microcontrollers that you will be able to Simulate.

PIC16F84, PIC16F628 or PIC16F648, PIC16F777, PIC16F877A, PIC18F452, PIC18F4520, PIC18F4550 or PIC18F4620, ATMEGA328

Boards that you will be able to Simulate

Labtools development board McLab1, Labtools development board McLab2, Microgenius development board PICGenios, Arduino Uno development board

--------------------------------

PIC Microcontrollers: Design & Manufacture Your Training Kit

A-Z Guide that allows you to make a factory quality training kits that meet your exact needs.

>>> A-Z Guide to designing, drawing and testing different training kit circuit that comes in hand, using one of the most popular software in the electronics industry, after this course, you will be a master at making PIC Microcontrollers Training Kit instead of buying it. <<<

Welcome to Make PIC Microcontrollers Training Kit course.

There are many reasons Why You Should Take this course:

Commercial Training Kits have many functions that you might never use and add an additional cost which makes the overall cost of a kit very high.

There is no chance that you will find a kit that matches your exact needs.

Making things with your own hands will give you a very good understanding of how electronic boards are made and will help you be a professional in making permanent Printed circuit boards.

You can easily adjust the items of the kit and make many copies at your home at a very low price.

You will get to practice playing with electronics.

So Make PIC Microcontrollers Training Kit course will offer you:

A-Z Guide to designing, drawing and testing different training kit circuit that comes in hand, using one of the most popular software in the electronics industry, after this course, you will be a master at making your own training kit instead of buying it.

You will become professional in making your own circuits, you will even be able to master mass producing an electronic module for Microcontroller that you find useful.

Video and Text lectures are included along with the software package that will be used in this course.

All that you need for this course is your laptop and headphones.

This course is open for comments and suggestions.

Another reason Why you should take this course, well, because you will learn by doing not by listening and you will become an expert in making your own circuits.

---------------------------------------------------------------------------------

Design and Simulate Arduino Boards and Test Your Code

Start working with different Arduino boards without buying them and start unleashing the power of code in Simulation

>>> The Arduino is an open-source electronics platform based on easy-to-use hardware and software. Sensing the environment by receiving inputs from many sensors, Arduino affects its surroundings by controlling lights, motors, and a number of other accessories. It's intended for anyone making interactive hardware projects and in this course, we will make it easy for you to Design and Simulate Arduino Boards and Start Testing Your Codes Freely. <<<

Welcome to Design and Simulate Arduino Boards and Test Your Code course.

In this course, you will learn how to Simulate different Arduino Boards in A Professional Simulation Environment. It will help you unleash your full coding potential without buying any of the Arduino boards.

This course will help you test your codes and schematics for Arduino without the risk of burning your board. No More bad connections or wrong codes.

Contents and Overview This course is designed for anyone interested in learning electronic design. You don't need to have any previous experience, and all you need is a computer.

Boards that can be Simulated: Arduino Uno, Mega, Nano, zero and others

---------------------------------------------------------------

PCB Design: Make Arduino Nano using Altium Designer

Learn Printed Circuit Board design by Making Arduino Nano in Altium Designer Software.

>>> Learn Printed Circuit Board design by Making Arduino Nano in Altium Designer Software. <<<

Welcome to this course.

What is this course about:

In This course you will learn from start to finish, from zero to production ready on how to design custom Arduino Nano Printed Circuit Board . It will help you to improve your PCB design skills which will help you to get started freelancing or to get a job in PCB design with Altium Designer since it's the most used PCB design tools

---------------------------------------------------------------------

What you should expect after taking this course:

Get started PCB design using Altium Designer.

Download and install Altium designer.

Create your own component library so that you can create your own components that you don't have a library for which will help you freelance online since many jobs ask to create component libraries.

Create the Arduino Nano Schematic in Altium designer.

Wiring components in Schematic view.

Transfer schematic into PCB.

Place components on board.

Create a multilayer board.

Route layers and place components on board.

Autoroute to save time.

Eliminate design errors.

Create Gerber files for your manufacturer.

----------------------------------------------------

Make PIC microcontroller based Arduino Development Board

This guild will help you know how to make PIC Microcontroller Based Arduino Like board at home Step by Step

>>> This Course will show you in a step by step manner, how to make your very own PIC Microcontroller USB Enabled Training Board (Just like the Arduino Board) <<<

Welcome to this course.

Have you ever wanted to try a Code on your PIC Microcontroller, but didn't have the programmer?

Do you wish to have your very own Arduino Like PIC Microcontroller Board that you can easily plug via USB and start coding your projects?

Are you tired from the process of removing a Microcontroller from the board to reprogram it for development, testing and improving your projects?

The Solution is here >> Our Brand New Course

This Course will show you in a step by step manner, how to make your very own PIC Microcontroller USB Enabled Training Board (Just like the Arduino Board)

All that you need to do is plug the USB Cable and start writing your code to PIC Microcontroller in no time and see the results without having to remove anything, a healthy helpful testing, and development environment of your own creation.

This is available for your in this course + Bonuses and additional Material + Breadboard and PCB Design if you just want to try things out before mass production

This guild will help you know how to make PIC Microcontroller Based Arduino Like board at home Step by Step

This tutorial shows you how to build a PIC Microcontroller compatible board, it will take you in a step by step manner to know what each component inside the Arduino board is, and what it does and how to wire it up

You will know what is the actual brain in Pinguino board and what you can do with it and how to interface it with your own PC and send codes freely, you will no longer burn a code to a board that you know nothing about it's hardware.

After this course you will be able to make your own board on a breadboard or PCB the choice is yours to make since all connections are explained in details.

A Computer or Laptop with any operating system
The Software that will be used to create the PCB Provided in the first Section (FREE)
Basic experience in Electronics
No materials required if you only wish to view the course
Have A basic Experience in browsing the internet
Time, Dedication and Patience to learn and implement new knowledge.

Everyone who's interested in Electronics
School Students who want's to learn more about electronics in simple ways
Teachers who are looking for ways to make learning more fun and interactive
Circuit Designers, PCB Designers, Electronics Geeks, Circuits Creators
Anyone Interested in Learning The right way to solder PIC Microcontroller Geeks
Anyone looking to learn PIC Microcontroller but don't want to buy the Microcontrollers or Electronic Components
Anyone looking to learn PIC Microcontroller without spending any money buying Programming and Simulation Software
Anyone starting their journey in PIC Microcontroller
Anyone looking for a free software to Simulate PIC Microcontroller
Anyone looking to unleash the power of coding using Simulation
Newbies looking to enhanse there Circuit design skills and make great PCBs and training kits in not time
Arduino Geeks
Anyone looking to learn Arduino but don't want to buy the boards
Anyone looking to learn Arduino without spending any money buying different boards
Anyone starting their journey in Microcontrollers
Anyone who Want to get a job in PCB design
Anyone who Want to learn Altium Designer in the shortest possible time.
Anyone who Want to get started creating cool gadgets
Anyone Interested in Learning New Things about Pinguino (PIC Microcontroller Based Arduino)
Anyone Interested in Knowing how Pinguino (PIC Microcontroller Based Arduino) board actually works
Anyone Interested in Knowing what each component inside Pinguino (PIC Microcontroller Based Arduino) does

Section 1 : Section 1 10 Lectures 00:39:03
Lecture 1 :
What You Will Learn in this Course Preview
Lecture 2 :
Who We Are
Lecture 3 :
Download And Install Software Free
Lecture 4 :
Getting Started
Lecture 5 :
Customizing Parts
Lecture 6 :
Schematic
Lecture 7 :
Exporting your design as Image or PDF
Lecture 8 :
Making PCB Part1
Lecture 9 :
Making PCB Part2
Lecture 10 :
Cleaning Board
Section 2 : Section 2 9 Lectures 00:23:01
Lecture 1 :
Finishing Board and Making it yours
Lecture 2 :
Making a more advance random schematic design
Lecture 3 :
Print PCB Design on Heat Paper
Lecture 4 :
Drilling
Lecture 5 :
What You will learn
Lecture 6 :
Introduction Prestart Defentions
Lecture 7 :
Installing the Required Software Proteus
Lecture 8 :
Basic introduction to Proteus ISIS interface and Tools
Lecture 9 :
Design Draw and Test your First Simple Circuit
Section 3 : Section 3 10 Lectures 00:42:17
Lecture 1 :
Introducing Some Teqniques to Master ISIS
Lecture 2 :
Create Your Own Electric Element in ISIS Proteus
Lecture 3 :
Design Draw and Test a more advanced Circuit
Lecture 4 :
Basic Introduction to ARES interface and tools
Lecture 5 :
Preparing ISIS Circuit Design to be moved to ARES
Lecture 6 :
Placing Elements the right way in ARES
Lecture 7 :
Start Routing in Different Ways
Lecture 8 :
Finalize Your Circuit for mass production
Lecture 9 :
Printing Your design on Heat paper
Lecture 10 :
Software used in This Course
Section 4 : Section 4 10 Lectures 00:29:52
Lecture 1 :
Download and Install The Software
Lecture 2 :
User Interface Quick Introduction
Lecture 3 :
Practical Work First Experiment Simple Led ONOFF Circuit using switches
Lecture 4 :
Flowcharts Introduction and Example
Lecture 5 :
Flowcharts and Microcontrollers Intro
Lecture 6 :
7 Segment Counter Example
Lecture 7 :
Using 3D Multimeter and Graphs for Circuit Testing
Lecture 8 :
Mechanism and Mechanical Parts
Lecture 9 :
Course Contents
Lecture 10 :
Flowcharts Subroutine Example
Section 5 : Section 5 10 Lectures 00:36:44
Lecture 1 :
How to Solder
Lecture 2 :
Things you need to start soldering
Lecture 3 :
Things to Consider when Choosing Soldering Irons
Lecture 4 :
Soldering Accessories
Lecture 5 :
Soldering Steps Step One Preparation
Lecture 6 :
Soldering Steps Step Two Tinning
Lecture 7 :
Soldering Steps Step Three Soldering
Lecture 8 :
Cleaning Your Soldering Iron
Lecture 9 :
Tips and Tricks
Lecture 10 :
Examples of Bad Soldering
Section 6 : Section 6 10 Lectures 00:40:39
Lecture 1 :
Practical Example of Good soldering and Bad soldering
Lecture 2 :
Practical Soldering Iron Practical
Lecture 3 :
Lets Try Soldering
Lecture 4 :
Practical How to clean soldering tip
Lecture 5 :
Practical How to solder correctly
Lecture 6 :
Practical Soldering
Lecture 7 :
Download and Install Simulation Software
Lecture 8 :
Interface Explained
Lecture 9 :
Interface Menu Explained in Details
Lecture 10 :
Main Window Commands
Section 7 : Section 7 10 Lectures 01:02:31
Lecture 1 :
Simulation Boards MCLab1 For PIC16F84, PIC16F628 or PIC16F648
Lecture 2 :
Simulation Boards MCLab2 For PIC16F and PIC18F
Lecture 3 :
Simulation Boards PIC Genios Board and Arduino Board
Lecture 4 :
Playing with Code Examples with Different Compilers
Lecture 5 :
Buttons and LEDs Reading Input and Writing Output
Lecture 6 :
LCD Interfacing and Simulation
Lecture 7 :
Relay Interfacing with PIC Microcontroller
Lecture 8 :
7 Segment Simulation
Lecture 9 :
Buzzer Temperature Fan Heater and PWM Simulation Components
Lecture 10 :
What is a Training Kit
Section 8 : Section 8 10 Lectures 00:52:24
Lecture 1 :
How training kits make your programming, wiring and testing an easy job
Lecture 2 :
What are the main components that must be in the training kit
Lecture 3 :
What are the extra components that you can be added
Lecture 4 :
What is Printed Circuit Board Design
Lecture 5 :
What is the best software to do that
Lecture 6 :
How to start Designing your kit
Lecture 7 :
Designing your kit continue
Lecture 8 :
Adding power circuit with protection
Lecture 9 :
Making PCB Part1
Lecture 10 :
Making PCB Part2
Section 9 : Section 9 10 Lectures 00:32:06
Lecture 1 :
Final PCB
Lecture 2 :
Finishing the board
Lecture 3 :
Buying items online and End of the Course
Lecture 4 :
Installing Arduino Library For Proteus
Lecture 5 :
Downloading and Installing Proteus Software
Lecture 6 :
Adding Arduino Library to Proteus
Lecture 7 :
Downloading and Installing Arduino Coding Software
Lecture 8 :
Your First Code in Arduino Coding Software
Lecture 9 :
Editing the code and Getting the Hex File
Lecture 10 :
Load the hex file and Run the Simulation
Section 10 : Section 10 10 Lectures 00:49:43
Lecture 1 :
Download and Installing Altium Designer
Lecture 2 :
Altium Designer Interface Introduction
Lecture 3 :
Create Component Symbol & Add Pins
Lecture 4 :
Finishing the Schematic
Lecture 5 :
Creating Your Components Symbol - Making Footprint and PCB Layout
Lecture 6 :
Link footprint with Schematic Library
Lecture 7 :
Adding the new Library File to your Design
Lecture 8 :
Creating the Atmega Component Symbol
Lecture 9 :
Creating the Atmega PCB Footprint
Lecture 10 :
Adding Components and Placing them on Schematic
Section 11 : Section 11 10 Lectures 00:49:24
Lecture 1 :
ATMEGA Schematic Connection
Lecture 2 :
USB Connector Schematic
Lecture 3 :
Header Pins for Nano Board
Lecture 4 :
Adding Resistors LED Indicators Voltage Regulator
Lecture 5 :
Annotating and Compiling Project
Lecture 6 :
Getting Started with the PCB Design Solve Errors
Lecture 7 :
Drawing The Board Shape
Lecture 8 :
Placing PCB Items Atmega and Headers
Lecture 9 :
ICSP SWITCH Resistor array crystal micro usb
Lecture 10 :
FTDI Regulator Capacitors
Section 12 : Section 12 9 Lectures 00:50:34
Lecture 1 :
Manual Routing
Lecture 2 :
AutoRouting
Lecture 3 :
Improve AutoRouting Trial and Error
Lecture 4 :
Greber File and Bill of Material
Lecture 5 :
Introduction and Required Components
Lecture 6 :
Schematic
Lecture 7 :
Download and install Pinguino IDE
Lecture 8 :
Download Bootloader File
Lecture 9 :
Burn Hex File of Bootloader to Microcontroller
Section 13 : Section 13 10 Lectures 00:21:48
Lecture 1 :
Drivers
Lecture 2 :
First EXAMPLE Blink A LED
Lecture 3 :
Now Build your own Pinguino
Lecture 4 :
Exporting your Design with Image or PDF
Lecture 5 :
Print PCB Design in heat papers
Lecture 6 :
Introduction Prestart Detentions
Lecture 7 :
Design Draw and Test your First simple Circuit
Lecture 8 :
Introducing some technic to master ISIS
Lecture 9 :
Segment Counter Example
Lecture 10 :
Things to consider when choosing a soldering iron
Section 14 : Section 14 10 Lectures 00:25:55
Lecture 1 :
Soldering Steps-Step three soldering
Lecture 2 :
Tips & Tricks
Lecture 3 :
Practical Example of Good and Bad Soldering
Lecture 4 :
Practical Soldering Iron -Practical
Lecture 5 :
Practical how to clean soldering Tip
Lecture 6 :
Interface Menu Explained with Details
Lecture 7 :
Main windows Commands
Lecture 8 :
Segment Simulation
Lecture 9 :
What are the extra components that you can add
Lecture 10 :
How to start designing your own kit
Section 15 : Section 15 10 Lectures 01:01:57
Lecture 1 :
Buying Items Online and End the Course
Lecture 2 :
PCB fabrication Print PCB design on heat transfer Paper
Lecture 3 :
Downloading_s and Installing Proteus software
Lecture 4 :
Your first code in Arduino Coding Software
Lecture 5 :
Downloads and Installing Altium Designer
Lecture 6 :
Create components and Symbol
Lecture 7 :
Create your component symbols-Making footprint and PCB Layout
Lecture 8 :
Adding the New Library Files to your Design
Lecture 9 :
Adding resistors LED Indicators Voltage Regualtors
Lecture 10 :
Anotating the Compiling Project
Section 16 : Section 16 6 Lectures 00:52:53
Lecture 1 :
Getting Started with the PCB Design Solve Error
Lecture 2 :
Placing PCB and ATMEGA headers
Lecture 3 :
Placing PCB and ATMEGA headers
Lecture 4 :
Improve Auto-Routing Trial and Error
Lecture 5 :
Greber File and Bill Material
Lecture 6 :
Bonus Lecture Manufacture a Professional PCB - By PCBWay

How do i access the course after purchase?
It's simple. When you sign up, you'll immediately have unlimited viewing of thousands of expert courses, paths to guide your learning, tools to measure your skills and hands-on resources like exercise files. There’s no limit on what you can learn and you can cancel at any time.
Are these video based online self-learning courses?
Yes. All of the courses comes with online video based lectures created by certified instructors. Instructors have crafted these courses with a blend of high quality interactive videos, lectures, quizzes & real world projects to give you an indepth knowledge about the topic.
Can i play & pause the course as per my convenience?
Yes absolutely & thats one of the advantage of self-paced courses. You can anytime pause or resume the course & come back & forth from one lecture to another lecture, play the videos mulitple times & so on.
How do i contact the instructor for any doubts or questions?
Most of these courses have general questions & answers already covered within the course lectures. However, if you need any further help from the instructor, you can use the inbuilt Chat with Instructor option to send a message to an instructor & they will reply you within 24 hours. You can ask as many questions as you want.
Do i need a pc to access the course or can i do it on mobile & tablet as well?
Brilliant question? Isn't it? You can access the courses on any device like PC, Mobile, Tablet & even on a smart tv. For mobile & a tablet you can download the Learnfly android or an iOS app. If mobile app is not available in your country, you can access the course directly by visting our website, its fully mobile friendly.
Do i get any certificate for the courses?
Yes. Once you complete any course on our platform along with provided assessments by the instructor, you will be eligble to get certificate of course completion.
For how long can i access my course on the platform?
You require an active subscription to access courses on our platform. If your subscription is active, you can access any course on our platform with no restrictions.
Is there any free trial?
Currently, we do not offer any free trial.
Can i cancel anytime?
Yes, you can cancel your subscription at any time. Your subscription will auto-renew until you cancel, but why would you want to?

Ashraf Al Madhoun,

10429 Course Views

124 Courses

My passion is inspiring people through online courses. I love learning new skills, and since 2007 have been teaching people like you everything I know. Through my online learning business, Educational Engineering School, I create courses that teach you how to become the better version of yourself with all kinds of skills. What would you like to learn? Would you like to make money being an Embedded System Developer? Would you like to build your own 6-figure business? Would you like to learn how to code, circuit design or solder electronic components? Would you like to make better projects? Would you like to start an embedded system career, create great projects, kick start an idea, program, simulate, and create PCB Boards, launch a freelance career? If you want to do any of these things, just enroll in the course. You have a 30-day money back guarantee if you don't like it. And I'm always improving my courses so that they stay up to date and the best that they can be. Check them out, and enroll today!