Control PIC Microcontroller with GUI via USB or RS232

Control PIC Microcontroller using a GUI via USB or RS232

Interface PIC Microcontroller using Serial Communication RS232 or USB and a Visual Interface

Created by : Rated :4.8 591 views

Last Updated: 2024-11-26 04:11:08 English Course Type: Self Learning

Interface Microcontroller with Computer or Laptop via Serial Communication RS232 or USB
Create a Visual Interface for Your System
Interface PIC Microcontroller with Computer or Laptop via USB Port
Create a Visual Interface for Your System to easily Control It
Write a Code to Make PIC Microcontroller recognize USB and use it to send and receive data
Control PIC Microcontroller using USB Port and a Computer
Know how USB function and learn about it’s internal structure
Write code for USB Interfacing
Embed code in the design
Program PIC Microcontroller like a champ
Understand the principles of USB Interfacing and programming in PIC Microcontrollers
Connect your PIC Microcontroller to PC or Laptop and control it using USB Interfacing
Understand basic principles of USB Interfacing

Welcome to this course.

In this Course You will learn how to Move to the next level in Communication between Microcontrollers and Computers, You will get a step-by-step guide on How to create A visual Interface in your computer/Laptop that will send and receive data to and from a Microcontroller using RS232 Serial Communication Standard or USB.

Simulation and Practical lessons to Cover everything there is to know about USB and RS232 Serial Communication

You will be able to communicate with your Microcontroller and build a fully functional interactive system that will make it easy for you to monitor different variables such as temperature, and send control signals to turn on or off system devices such as fan or heater.

Serial/USB Communication provides means to control any type of Microcontroller via your own computer whether it's a desktop or a laptop, what you need to do is just create the proper interface which we will teach you how to do in this course.

This course will be your gate, and you will have no limits, you can make a temperature control, RC robot, SCADA System and a lot of other applications via serial interfacing.

Everything you wanted to know about USB Interfacing but was too afraid to ask, or Asked without getting Answers!

This Course also contains a Step By step-by-step guide to USB Interfacing with a PIC Microcontroller

This USB Section Consists of 39 Lecture with more than 3 hours of HD Video Content and supplementary material in which we cover every aspect of USB Interfacing including teaching you how to design, simulate and connect everything in real life, I can assure you that after this course you will be a professional in USB Interfacing with PIC Microcontroller

Why You Should Use USB Interfacing:

Higher speed than any conventional interfacing method

Only Four wires are used (Two PIC Microcontroller Pins are needed to connect more than 100 devices via USB)

Low power consumption

Support and Libraries

A computer to run the software
A basic knowledge in Programming in any language
No Material is required for this Course
Download and Install Proteus Professional (FREE & Explained inside the Course)
Download and Install MikroC Pro! (FREE & Explained inside the Course)
Download The course Material in PDF and Print them if possible
Students must have the knowledge of basic electronics

Microcontrollers Geeks
Anyone Interested in Interfacing Microcontroller with their Computer or Laptops
Anyone Interested in Controlling Microcontrollers via Visual Interactive Interface
PIC Microcontroller Lovers
Anyone Interested in Interfacing PIC Microcontroller with their Computer or Laptops via USB Port
Anyone Interested in Controlling Microcontrollers via Visual Interactive Interface using USB Connection

Section 1 : Control PIC Microcontroller using a GUI via USB or RS232 31 Lectures 02:34:15
Lecture 1 :
Introduction Preview
Lecture 2 :
What is a GUI
Lecture 3 :
Microsoft Visual Studio
Lecture 4 :
MikroC Pro for C Coding of Microcontrollers
Lecture 5 :
Proteus Virtual USB Installation
Lecture 6 :
Software that can be used to design a GUI
Lecture 7 :
Different Communication Methods that Can be used
Lecture 8 :
What is Serial Communication and RS232
Lecture 9 :
How To Create Your First GUI Project Quick Intro
Lecture 10 :
Introduction to the USB World
Lecture 11 :
Introduction to the USB World
Lecture 12 :
Hardware and Software Requirements
Lecture 13 :
Advantages of USB Communication
Lecture 14 :
USB Pinout Port Wiring
Lecture 15 :
USB Transfer speeds
Lecture 16 :
USB Device Classes
Lecture 17 :
Introduction to Descriptor
Lecture 18 :
Creating a descriptor file in MikroC
Lecture 19 :
Creating a descriptor file in MikroC - Practica
Lecture 20 :
USB Libraries HID Enable
Lecture 21 :
USB RAM
Lecture 22 :
USB Functions
Lecture 23 :
Circuit Design for First Example
Lecture 24 :
Installing the Virtual USB Port Feature to enable Simulation
Lecture 25 :
First Example Send and Receive Data
Lecture 26 :
Third Example Turn Leds On and Off via USB
Lecture 27 :
Forth Example Reading Input - Button Press
Lecture 28 :
Burning the Code to PIC using A Programmer
Lecture 29 :
MikroC and Ql2006 Right Configuration for the Code file
Lecture 30 :
DEVICE DRIVERS FOR USB interfacing with pic microcontroller
Lecture 31 :
USB Interfacing Led Lighting

How do i access the course after purchase?
It's simple. When you sign up, you'll immediately have unlimited viewing of thousands of expert courses, paths to guide your learning, tools to measure your skills and hands-on resources like exercise files. There’s no limit on what you can learn and you can cancel at any time.
Are these video based online self-learning courses?
Yes. All of the courses comes with online video based lectures created by certified instructors. Instructors have crafted these courses with a blend of high quality interactive videos, lectures, quizzes & real world projects to give you an indepth knowledge about the topic.
Can i play & pause the course as per my convenience?
Yes absolutely & thats one of the advantage of self-paced courses. You can anytime pause or resume the course & come back & forth from one lecture to another lecture, play the videos mulitple times & so on.
How do i contact the instructor for any doubts or questions?
Most of these courses have general questions & answers already covered within the course lectures. However, if you need any further help from the instructor, you can use the inbuilt Chat with Instructor option to send a message to an instructor & they will reply you within 24 hours. You can ask as many questions as you want.
Do i need a pc to access the course or can i do it on mobile & tablet as well?
Brilliant question? Isn't it? You can access the courses on any device like PC, Mobile, Tablet & even on a smart tv. For mobile & a tablet you can download the Learnfly android or an iOS app. If mobile app is not available in your country, you can access the course directly by visting our website, its fully mobile friendly.
Do i get any certificate for the courses?
Yes. Once you complete any course on our platform along with provided assessments by the instructor, you will be eligble to get certificate of course completion.
For how long can i access my course on the platform?
You require an active subscription to access courses on our platform. If your subscription is active, you can access any course on our platform with no restrictions.
Is there any free trial?
Currently, we do not offer any free trial.
Can i cancel anytime?
Yes, you can cancel your subscription at any time. Your subscription will auto-renew until you cancel, but why would you want to?

Ashraf Al Madhoun,

10428 Course Views

124 Courses

My passion is inspiring people through online courses. I love learning new skills, and since 2007 have been teaching people like you everything I know. Through my online learning business, Educational Engineering School, I create courses that teach you how to become the better version of yourself with all kinds of skills. What would you like to learn? Would you like to make money being an Embedded System Developer? Would you like to build your own 6-figure business? Would you like to learn how to code, circuit design or solder electronic components? Would you like to make better projects? Would you like to start an embedded system career, create great projects, kick start an idea, program, simulate, and create PCB Boards, launch a freelance career? If you want to do any of these things, just enroll in the course. You have a 30-day money back guarantee if you don't like it. And I'm always improving my courses so that they stay up to date and the best that they can be. Check them out, and enroll today!